554
YASKAWA
TOEPYAIGA8002B GA800 Drive Programming
5.
Push
or
to select [Custom Monitor 1], then push
.
6.
Push
or
to select the monitor number to register, then push
.
Set the x-xx part of monitor
Ux-xx
. For example, to show monitor
U1-05
, set it to “105” as shown in this figure.
The configuration procedure is complete.
◆
Show Custom Monitors
The procedure in this section shows how to show the registered custom monitors.
1.
Push
(Home) to show the HOME screen.
Note:
• The keypad will show [Home] in the top right corner when the HOME screen is active.
• If [Home] is not shown on
, push
(Back) to show [Home] on
.
2.
Push
(Menu).
3.
Push
or
to select [Monitors], then push
.
4.
Push
or
to select [Custom Monitor], then push
.
The keypad shows the selected monitor as shown in this figure.
