2 Compatible Devices
2.2.3
Σ
-V-SD Driver
2-18
(2) Cable Specifications for 24-volt Control Power Supply (With loose leads at one end
and connects a
Σ
-V-SD driver to a 24-volt control power supply)
∗
Specify the cable length in
of the order number.
Example: JZSP-CNG00-01-E (1 m)
(3) Cable Specifications for 24-volt Control Power Supply (With connectors on both
ends and connects two
Σ
-V-SD drivers)
∗
1.
Specify the cable length in
of the order number.
Example: JZSP-CNG01-A2-E (0.2 m)
∗
2.
Use a cable with a length of 0.3 m for the CACP-JU45A3B converter.
(4) Cable Specifications for Local Bus Communications
(5) Cable Specifications for Terminating Resistor of the Local Bus
(6) Cable Specifications for Converter I/O Signals
∗
Specify the cable length in
of the order number.
Example: JZSP-CJI01-01-E (1 m)
Items
Specifications
Order No. *
JZSP-CNG00-
-E
Cable Length
1 m, 2 m, 3 m
Cable and
Connector
Cable: UL1015 AWG14
Cable-end connector to driver: 175362-1 (PIN : 353717-2)
Items
Specifications
Order No.
*1
JZSP-CNG01-A
-E
Cable Length
*2
0.2 m or 0.3 m
Cable and
Connector
Cable: UL1015 AWG14
Connector: 175362-1 (PIN : 353717-2)
Connector manufacturer: Tyco Electronics Japan G.K.
Items
Specifications
Order No.
JUPIT-W6004-A5
Cable Length
0.5 m
Cable
HRZFVV-ESB (20276)
Remarks
The total number of cables must equal to the total number of SERVOPACKs
used.
Items
Specifications
Order No.
JUPIT-W6024
Remarks
Connect the terminating resistor only to the SERVOPACK on the far right.
Items
Specifications
Order No. *
JZSP-CJI01-
-E
Cable Length
1 m, 2 m, 3 m
Cable and
Connector
Cable: HP-SB/20276SR #28
×
6P
Cable-end connector for external device: 10114-6000EL (Crimping type)
Remarks
Used for emergency stop and the MCONs.
