6 - 21
–
+
ELEC
TPS (THROTTLE POSITION SENSOR) SYSTEM
3. Inspect:
●
TPS coil variable resistance
Check that the resistance in increased
as the throttle grip is moved from the
full close position to the full open posi-
tion.
Out of specification
→
Replace.
Tester (+) lead
→
Yellow lead
1
Tester (–) lead
→
Black lead
2
TPS coil variable
resistance
Tester selec-
tor position
Full closed Full opened
k
Ω
×
1
0 ~ 2 k
Ω
at
20 ˚C
(68 ˚F)
4 ~ 6 k
Ω
at
20 ˚C
(68 ˚F)
TPS REPLACEMENT AND ADJUSTMENT
1. Remove:
●
TPS coupler
●
Screw (TPS)
1
●
TPS
2
NOTE:
Loosen the screws (TPS) using the T25 bit.
2. Replace:
●
TPS
3. Install:
●
TPS
1
●
Screw (TPS)
2
●
TPS coupler
NOTE:
●
Align the slot
a
in the TPS with the projec-
tion
b
on the carburetor.
●
Temporarily tighten the screws (TPS).
1
2
2
1
b a
