5 - 50
CHAS
4. Install:
●
Plain washer
1
●
Ring nut
2
Tighten the ring nut using the ring nut
wrench
3
.
Refer to “STEERING HEAD INSPEC-
TION AND ADJUSTMENT” section in
the CHAPTER 3.
T
R
.
.
7 Nm (0.7 m · kg, 5.1 ft · lb)
5. Check the steering shaft by turning it lock
to lock. If there is any binding, remove the
steering shaft assembly and inspect the
steering bearings.
6. Install:
●
Plain washer
1
7. Install:
●
Front fork
1
●
Handle crown
2
●
Main switch
3
●
Coupler bracket
4
●
Hose guide bracket
5
NOTE:
●
Install the coupler bracket on the outside of
the hose guide bracket.
●
Temporarily tighten the pinch bolts (under
bracket).
●
Do not tighten the pinch bolts (handle crown)
yet.
8. Install:
●
Plain washer
1
●
Steering shaft nut
2
T
R
.
.
145 Nm (14.5 m · kg, 105 ft · lb)
STEERING
