5 - 8
CHAS
Rear wheel
1. Install:
●
Bearing (right)
1
●
Circlip
2
●
Spacer
3
●
Bearing (left)
4
●
Oil seal
5
NOTE:
●
Apply the lithium soap base grease on the
bearing and oil seal lip when installing.
●
Install the bearing with seal facing outward.
●
Use a socket that matches the outside diam-
eter of the race of the bearing.
●
Right side of bearing shall be installed first.
●
Install the oil seal with its manufacture’s
marks or numbers facing outward.
CAUTION:
Do not strike the inner race of the bearing.
Contact should be made only with the outer
race.
New
New
2. Install:
●
Brake disc
1
●
Bolt (brake disc)
2
NOTE:
Tighten the bolts in stage, using a crisscross
pattern.
T
R
.
.
14 Nm (1.4 m · kg, 10 ft · lb)
3. Install:
●
Driven sprocket
1
●
Bolt (driven sprocket)
2
●
Plain washer (driven sprocket)
3
●
Nut (driven sprocket)
4
NOTE:
Tighten the nuts in stage, using a crisscross
pattern.
T
R
.
.
50 Nm (5.0 m · kg, 36 ft · lb)
FRONT WHEEL AND REAR WHEEL
