Yamaha TTR125LM, Owner'S Service Manual

Page: 366 / 468

5 - 13
CHAS
Brake master cylinder
1. Install:
●
Brake master cylinder 1
●
Brake master cylinder bracket 2
●
Bolt (brake master cylinder bracket) 3
NOTE:
●
Install the brake master cylinder bracket so
that the arrow mark
a
face upward.
●
First tighten the bolts on the upper side of the
brake master cylinder bracket, and then
tighten the bolts on the lower side.
2. Install:
●
Brake lever 1
●
Spring 2
●
Bolt (brake lever) 3
●
Nut (brake lever) 4
NOTE:
●
Apply the lithium soap base grease on the
spring, bolt and brake lever sliding surface.
●
Apply the molybdenum disulfide grease on
the tip of the adjuster bolt.
T
R
.
.
9 Nm (0.9 m · kg, 6.5 ft · lb)
T
R
.
.
7 Nm (0.7 m · kg, 5.1 ft · lb)
T
R
.
.
7 Nm (0.7 m · kg, 5.1 ft · lb)
Brake hose
1. Install:
●
Copper washer 1
●
Brake hose 2
●
Union bolt 3
WARNING
Always use new copper washers.
CAUTION:
Install the brake hose so that its pipe por-
tion
a
directs as show and lightly touches
the projection
b
on the brake caliper.
New
T
R
.
.
26 Nm (2.6 m · kg, 19 ft · lb)
FRONT BRAKE