Yamaha TTR125LM, Owner'S Service Manual

Page: 276 / 468

4 - 46
ENG
CLUTCH AND PRIMARY DRIVEN GEAR
Clutch
1. Install:
●
Conical spring washer 1
●
Thrust plate 2
●
Primary driven gear 3
●
Thrust plate 4
●
Clutch boss 5
2. Install:
●
Lock washer
●
Nut (clutch boss) 1
NOTE:
Use the clutch holding tool 2 to hold the clutch
boss.
Å
For USA and CDN
ı
Except for USA and CDN
3. Bend:
●
Lock washer tab
Clutch holding tool:
YM-91042/90890-04086
New
T
R
.
.
60 Nm (6.0 m · kg, 43 ft · lb)
Å ı
4. Install:
●
Friction plate
1
●
Clutch plate
2
NOTE:
●
Install the clutch plates and friction plates
alternately on the clutch boss, starting with a
friction plate and ending with a friction plate.
●
Apply the engine oil on the friction plates and
clutch plates.
●
Be sure to install a clutch plate with projec-
tion
a
offset approximately 90˚ from previ-
ous plates projection. Continue this
procedure in a clockwise direction until all
clutch plates are installed.