Yamaha TTR125LM, Owner'S Service Manual

Page: 164 / 468

3 - 18
INSP
ADJ
3. Replace:
●
Brake pad
Brake pad replacement steps:
●
Remove the brake caliper support bolt 1 .
●
Turn the brake caliper 2 counterclock-
wise
a
.
●
Replace the brake pads 3 .
●
Connect the transparent hose 4 to the
bleed screw 5 and place the suitable con-
tainer under its end.
●
Loosen the bleed screw and push the
brake caliper piston in.
●
Tighten the bleed screw.
T
R
.
.
Bleed screw:
6 Nm (0.6 m • kg, 4.3 ft • lb)
●
Install the brake caliper 6 and brake cali-
per support bolt 7 .
T
R
.
.
Brake caliper support bolt:
22 Nm (2.2 m • kg, 16 ft • lb)
CAUTION:
Do not reuse the drained brake fluid.
NOTE:
Apply the lithium soap base grease on the
caliper support bolt.
4. Inspect:
●
Brake fluid level
Refer to “BRAKE FLUID LEVEL
INSPECTION” section in the CHAP-
TER 3.
5. Check:
●
Brake lever operation
A softy or spongy feeling
→
Bleed
brake system.
Refer to “BRAKE SYSTEM AIR
BLEEDING” section.
FRONT BRAKE PAD INSPECTION AND REPLACEMENT