Yamaha TTR125LM, Owner'S Service Manual

Page: 296 / 468

4 - 56
ENG
KICK AXLE AND SHIFT SHAFT
Shift shaft
1. Install:
●
Shift shaft 1
NOTE:
●
Apply the lithium soap base grease on the oil
seal lips.
●
Hook the spring ends onto the stopper 2 .
Kick axle assembly
1. Install:
●
Kickstarter segment gear 1
●
Plain washer 2
●
Torsion spring 3
On kick axle 4 .
NOTE:
Make sure the stopper
a
of the torsion spring
fits into the hole
b
on the kick axle.
2. Install:
●
Spring guide 1
NOTE:
Slide the spring guide into the kick axle, make
sure the groove
a
in the spring guide fits on
the stopper of the torsion spring.
3. Install:
●
Kick axle assembly
1
NOTE:
●
Apply the engine oil on the kick axle.
●
Slide the kick axle assembly into the crank-
case, make sure the clip
2 and kick axle
stopper
b
fit into their home positions
a
,
c
.
4. Hook:
●
Torsion spring 1
NOTE:
Turn the torsion spring clockwise and hook
into the proper hole
a
in the crankcase.