Yamaha TTR125LM, Owner'S Service Manual

Page: 39 / 468

GEN
INFO
1 - 7
SPECIAL TOOLS
YM-01312-A, 90890-01312 Fuel level gauge
This gauge is used to measure the fuel level in the
float chamber.
YM-01312-A 90890-01312
YU-33270-B, 90890-01362 Flywheel puller
This tool is used to remove the rotor.
YU-33270-B 90890-01362
YM-33963, 90890-01367
YM-33281, 90890-01400
Fork seal driver weight
Fork seal driver attachment
These tools are used to installing the fork oil seal.
YM-33963
YM-33281 90890-01367
90890-01400
YU-33975, 90890-01403 Steering nut wrench
This tool is used when tighten the steering ring nut to
specification.
YU-33975 90890-01403
YS-01880-A, 90890-01701 Sheave holder
This tool is used for when loosening or tightening the
flywheel magneto securing nut.
YS-01880-A 90890-01701
YU-03112-C, 90890-03112 Pocket tester
Use this tool to inspect the coil resistance, output
voltage and amperage.
YU-03112-C 90890-03112
YU-08036-B
90890-03113
Inductive tachometer
Engine tachometer
This tool is needed for observing engine rpm.
YU-08036-B 90890-03113
YM-04019, 90890-04019 Valve spring compressor
This tool is needed to remove and install the valve
assemblies.
YM-04019 90890-04019
YM-91042, 90890-04086 Clutch holding tool
This tool is used to hold the clutch when removing or
installing the clutch boss securing nut.
YM-91042 90890-04086
Part number Tool name/How to use Illustration