![background image](http://html2.mh-extra.com/html/yaesu/ft1dr/ft1dr_operating-manual_3152714061.webp)
61
Scanning Function
Using the Scanning Function
Tips
To cancel a skip/selected memory channel, select [OFF].
When it is canceled, the icon on the LCD disappears.
Scanning Only the Selected Memory Channel
1
Switch to the Memory mode, and then recall the selected
memory channel.
2
Press
F
and then
2
.
Tips
•
Scanning (SCAN) is performed toward higher memory
channel numbers.
•
Only the selected memory channel is scanned.
•
If a signal is received during scanning, a beep is emitted and scanning stops for 5 seconds
to receive the current frequency.
•
When scanning is suspended, the decimal point blinks and the LCD stays lit.
•
After receiving the frequency for 5 seconds, scanning resumes.
•
To cancel scanning, press
p
.
•
You can select the range for scanning by selecting [5 SCAN] [5 SCAN WIDTH] in the Set
mode.
Scanning a Memory Bank
Only the memory channels in the recalled memory bank can be scanned.
1
Press
V
to enter the Memory mode.
2
Press
B
to enter Recall a memory bank.
Pressing
B
each time toggles between [MEMORY NO] and [BANK (No.)].
Tips
To recall another memory bank, press
F
and then
B
.
3
Turn
O
to select a memory bank.
Select a memory bank from BANK1 through BANK 24.
4
Press
B
.
The selected memory bank is determined.
5
Press
F
and then
2
.
Scanning (SCAN) is performed toward higher memory channel numbers.
Lights when a skip memory
channel is specified
Blinks when a select
memory channel is specified
Skip memory
channel
[SKP]
Selected memory
channel
[SELECT]
O
OFF
FT1DR̲DE̲Eng.indb 61
FT1DR̲DE̲Eng.indb 61
13/06/28 15:16
13/06/28 15:16