143
Functions Used
As Needed
Set Mode
Connecting an external device
Using the DATA terminal, the transceiver can support various functions by setting “GPS”,
the internal GPS unit begins outputting the position information data. The position
information of the transceiver can be transferred at approximately 1 second intervals
to the computer so that the position of the transceiver can be displayed in real-time on
programs such as map software.
Tips
• For properties such as communication speed and Input/Output between COM ports.
• For more details, see the Set mode option, [9 APRS] [17 COM PORT SETTING].
Connecting to a PC
Connecting a PC to the data terminal of the FT1DR/DE using the PC Connection Cable
(SCU-18) accessory will enable data transmission or updating firmware as described
below.
a. Transmit position location information received by the FT1DR/DE internal GPS
unit.
By setting [OUTPUT] in [17 COM PORT SETTING] of Set mode option [9 APRS] to
details on settings, see Set mode option [17 COM PORT SETTING] in the APRS
Instruction Manual.
• To show information, software operating with NMEA-0183 specified GGA and RMC
sentence is required.
b. FT1DR/DE Firmware Updates
When a new firmware update for the FT1DR/DE is available, go to the YAESU
homepage to download the programming data and update the FT1DR/DE to its newest
state.
SCU-18
(accessory)
FT1DR̲DE̲Eng.indb 143
FT1DR̲DE̲Eng.indb 143
13/06/28 15:17
13/06/28 15:17