86
Communicating with a Specific Remote Station
Using the Tone Squelch Function
Searching for the Frequency of the
Tone Squelch Used by the Remote Station
The frequency of the tone squelch used by the remote station can be searched for and
displayed.
Enter the Set mode:
1
Press and hold
M
for over 1 second.
2
Turn
O
to select [4 SIGNALING].
3
Press
H
.
4
Turn
O
to select [11 SQL TYPE].
5
Press
H
.
6
Turn
O
to select [TONE SQL].
7
Press
M
.
8
Turn
O
to select [12 TONE SQL FREQ].
9
Press
H
.
10
Receive the signal from the remote station.
11
Press and hold
B
over 1 second.
[TONE SEARCH] appears.
12
Release
B
.
Search for the tone frequency starts.
When a corresponding tone frequency is detected, a beep
is emitted and search stops temporarily. The detected tone
frequency blinks.
Tip
To set the searched tone frequency and exit from the Set mode:
Press
B
a beep is emitted. Quickly press
M
3 times.
Tip
For the operation to perform when scan stops, refer to “Selecting a Reception Method When Scanning
Stops” on page 59.
Selecting a DCS Code
You can select a DCS code from among 104 DCS codes (023 to 754).
1
Specify the operating frequency.
2
Press and hold
M
over 1 second to enter the Set mode.
3
Turn
O
to select [4 SIGNALING].
4
Press
H
.
5
Turn
O
to select [2 DCS CODE].
6
Press
H
.
FT1DR̲DE̲Eng.indb 86
FT1DR̲DE̲Eng.indb 86
13/06/28 15:16
13/06/28 15:16