background image

S&C SpeedNet

 Radio

Instruction Sheet  1072-530

August 14, 2017© S&C Electric Company

© S&C Electric Company 2012-2017, all rights reserved

Setup

Table of Contents

Section  

 Page

Section  

 Page

Introduction

Qualified Persons  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Read this Instruction Sheet  . . . . . . . . . . . . . . . . . . . . . . 2
Retain this Instruction Sheet . . . . . . . . . . . . . . . . . . . . . . 2
Regulatory Information . . . . . . . . . . . . . . . . . . . . . . . . . . 3 
Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Warranty Qualifications . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Safety Information

Understanding Safety-Alert Messages . . . . . . . . . . . . . . 5
Following Safety Instructions  . . . . . . . . . . . . . . . . . . . . . 5
Replacement Instructions and Labels . . . . . . . . . . . . . . . 5

Safety Precautions

 . . . . . . . . . . . . . . . . . . . . . . . . . .  6

Network Setup

Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7

SpeedNet Security Administration

SpeedNet Security Information . . . . . . . . . . . . . . . . .  9
KeyGen Utility . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
Creating a Security Association Database . . . . . . . .  9
User Management Window . . . . . . . . . . . . . . . . . . .  10
Adding a User . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  11
Deleting a User . . . . . . . . . . . . . . . . . . . . . . . . . . . .  12
Modifying a User . . . . . . . . . . . . . . . . . . . . . . . . . . .  12
Clearing All Users . . . . . . . . . . . . . . . . . . . . . . . . . .  13
Adding a MAC Address to the Revocation List . . . .  13
Deleting a MAC Address from the Revocation List .  14
Clearing the Revocation List . . . . . . . . . . . . . . . . . .  14
Key Generation . . . . . . . . . . . . . . . . . . . . . . . . . . . .  15
Adding a Keyset  . . . . . . . . . . . . . . . . . . . . . . . . . . .  15
Deleting a Keyset  . . . . . . . . . . . . . . . . . . . . . . . . . .  16
Generating a Security File  . . . . . . . . . . . . . . . . . . .  17
Saving a Security Association Database. . . . . . . . .  19

Creating Another Security Association Database . .  20
Opening a Security Association Database . . . . . . .  20

Network Configuration

 . . . . . . . . . . . . . . . . . . . . . .  22

Key Updater Tool . . . . . . . . . . . . . . . . . . . . . . . . . . .  29

SpeedNet Client Tool

Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  33
Logging In . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  33
Main Window . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  34
Interfaces Window, Ethernet Tab . . . . . . . . . . . . . . .  35
Interfaces Window, Wireless Tab . . . . . . . . . . . . . . .  37
Interfaces Window, Serial Mode Tab . . . . . . . . . . . .  39
Multiple SCADA Masters . . . . . . . . . . . . . . . . . . . . .  41 
Repeater/SpeedGate Serial Gate Mode . . . . . . . . .  41 
Interfaces Window, Serial Port Tab . . . . . . . . . . . . .  42
Serial Pass-Through . . . . . . . . . . . . . . . . . . . . . . . .  43
IP Routing Window, Ad Hoc Routing Tab. . . . . . . . .  44
IP Routing Window, Routes Tab  . . . . . . . . . . . . . . .  48
IP Routing Window, ARP Tab  . . . . . . . . . . . . . . . . .  49
IP Routing Window, Blacklist Tab  . . . . . . . . . . . . . .  50 
Security Window, Encryption Tab . . . . . . . . . . . . . .  51
Security Window, MAC Filter Tab  . . . . . . . . . . . . . .  52
Admin Window, System Tab  . . . . . . . . . . . . . . . . . .  53
Admin Window, Firmware Tab . . . . . . . . . . . . . . . . .  54
Admin Window, Shell Tab  . . . . . . . . . . . . . . . . . . . .  54
Statistics Window, Ethernet Tab  . . . . . . . . . . . . . . .  56
Statistics Window, ICMP Tab . . . . . . . . . . . . . . . . . .  57
Statistics Window, UDP Tab  . . . . . . . . . . . . . . . . . .  58
Statistics Window, IP Tab  . . . . . . . . . . . . . . . . . . . .  58
Statistics Window, Wireless Tab  . . . . . . . . . . . . . . .  60
Statistics Window, Battery Status Tab . . . . . . . . . . .  60 
Statistics Window, AODV Tab  . . . . . . . . . . . . . . . . .  62
Statistics Window, RSSI Tab . . . . . . . . . . . . . . . . . .  62

NOTICE

SpeedNet Radio software and instruction sheets can be downloaded at 
sandc.com/support/automation-customer-support-portal.asp If you need 
assistance, please contact [email protected] or call (800) 621-5546.

Summary of Contents for SpeedNet































































Reviews: