142
Functions Used
As Needed
Set Mode
Clone Operation
Data and various settings saved in your transceiver can be copied to another FT-1DR
transceiver.
1
Turn off the power of both FT1DR/DE transceivers and connect an optional clone
cable (CT-168) to the DATA terminal of each transceiver.
2
Press
P
while pressing
F
on each transceiver.
The two transceivers are turned on and placed in the clone
mode.
3
Press
%
on the receiving side transceiver and
B
on
the transmission side.
Copying data starts.
When copying starts, the display on the receiving transceiver changes from
[--WAIT--] to [--RX--]. When data transmission begins from the sending transceiver,
the data transmission indicator appears on the LCD, indicating the data transfer is
in progress. The indicator appears on the receiving transceiver, as well when data
reception starts.
Tips
When copying is completed, the reception side transceiver returns to the normal mode. The
indication on the LCD of the transmission side transceiver returns from [--TX--] to [CLONE].
4
Turn off the power of both transceivers and disconnect the clone cable.
Caution
z
When the [ERROR] appears on the LCD during data transfer, copying cannot be completed. Check
the clone cable connection, and redo the clone operation from the beginning.
z
Time data cannot be copied.
FT1DR̲DE̲Eng.indb 142
FT1DR̲DE̲Eng.indb 142
13/06/28 15:17
13/06/28 15:17