78
Convenient Functions
Dual Reception (DW) Function
Tips
• For broadcast station frequencies, refer to “Preset Broadcast Station Frequencies List (See page
54)” or a commercially sold frequencies list.
• AF-DUAL reception function can be used for the radio frequency registered to the memory bank.
• Pressing
T
while a signal is being received, will switch to receiving the standby reception
frequency.
• With the AF-DUAL Function, an A Band or B Band registered with a AM broadcast (middle wave
frequency) or a FM broadcast frequency, set for standby reception, cannot be simultaneously
received while listening to the radio.
• To disable the AF-DUAL Function, press
F
and then
6
.
The frequency registered to the standby (memory channel) appears on the LCD.
O
Setting the resumption time of radio reception
While receiving radio broadcast (active side) and ham radio band (A-band or B-band) on
standby side, the transceiver may be set to resume receiving the broadcast audio [After
loss of receive signal] or [After transmission].
1
Press and hold
M
for over 1 second to enter the Set
mode.
2
Turn
O
to select [2 TX/RX].
3
Press
H
.
4
Turn
O
to select [3 AUDIO].
5
Press
H
.
6
Turn
O
to select [3 RX AF DUAL].
7
Press
H
.
8
Turn
O
to select reception time.
Set transmission time as well.
Transmission and reception for 1 second to 10 seconds,
HOLD (Fixed), or transmission for 1 second to 10 seconds.
Remarks
Default setting: transmission and reception for 2 seconds
Display
Operation
Transmission and
reception: 1 second
to 10 seconds
While receiving radio broadcast and ham radio band frequencies (A-band
and B-band) on standby simultaneously with [AF-DUAL Reception
Function], resumption of receiving radio broadcast can be set to [After
loss of receive signal] or [After transmission]. For example, if 5 seconds
is selected, radio reception resumes after 5 seconds after reception (or
transmission) ends.
Fixed
While receiving radio broadcast and ham radio band frequencies (A-band
and B-band) on standby simultaneously with [AF-DUAL Reception
Function], the transceiver will continue to receive a signal over that
frequency after signal detection without switching back to radio broadcast.
FT1DR̲DE̲Eng.indb 78
FT1DR̲DE̲Eng.indb 78
13/06/28 15:16
13/06/28 15:16