87
Communicating with a Specific Remote Station
Using the Tone Squelch Function
7
Turn
O
to select a DCS code.
8
Quickly
press
M
3 times to set the DCS code and exit
from the Set mode.
Tip
By default, the DCS code is set to [023].
Searching for the Frequency of the DCS Used by the Remote Station
The DCS code used by the remote station can be searched for and displayed.
Enter the Set mode:
1
Press and hold
M
over 1 second.
2
Turn
O
to select [4 SIGNALING].
3
Press
H
.
4
Turn
O
to select [11 SQL TYPE].
5
Press
H
.
6
Turn
O
to select [DCS].
Sets the DCS.
7
Press
M
.
8
Turn
O
to select [2 DCS CODE].
9
Press
H
.
10
Receive the signal from the remote station.
11
Press and hold
B
over 1 second.
[DCS SEARCH] appears.
12
Release
B
.
Searching for the DCS code begins. When a corresponding
DCS code is heard, a beep is emitted and search stops
temporarily. The found DCS code blinks.
Tip
To set the searched DCS code:
Press
B
a beep is emitted. Quickly press
M
3 times
to set the DCS code and exit from the Set mode.
Tip
To perform the operation when scan stops, refer to “Selecting a Reception Method When Scanning
Stops” on page 59.
FT1DR̲DE̲Eng.indb 87
FT1DR̲DE̲Eng.indb 87
13/06/28 15:16
13/06/28 15:16