123
Functions Used
As Needed
Set Mode
4
Turn
O
to select [1 DW TIME].
5
Press
H
.
6
Turn
O
to select the monitoring interval.
Interval can be selected from 0.1 SEC to 10 SEC.
Remark
Default: 5 seconds
7
Press
p
to save the priority memory channel monitoring
interval setting and exit the Set mode.
Turning illumination off when scanning stops
SCAN LAMP Function
You can set the backlight of LCD to turn ON or OFF when a signal is received during
scanning.
Enter the Set mode:
1
Press and hold
M
for over 1 second.
2
Turn
O
to select [5 SCAN].
3
Press
H
.
4
Turn
O
to select [2 SCAN LAMP].
5
Press
H
.
6
Turn
O
to select [OFF].
ON:
The LCD backlight will light when a signal is received.
OFF:
The LCD backlight will not light when a signal is
received.
Remark
Default:
ON
7
Press
p
to save the backlight ON or OFF setting when
scanning stops, and exit the Set mode.
Setting the time to resume scan
SCAN RE-START Function
You can set the time to resume scanning after a signal is received during scanning.
Enter the Set mode:
1
Press and hold
M
for over 1 second.
2
Turn
O
to select [5 SCAN].
3
Press
H
.
䎔䎃 䎧䎺䎃
䎧䎺䎃䎃䎷 䎬 䎰䎨
䎃 䎃䎃䎃 䎃 䎘 䎑 䎓 䏖䏈䏆
䏖䏈䏆
䎃
䎶䎨䎷䎝䎃䎃䎘䎃 䎶䎦 䎤 䎱
䎃䎃䎃䎃䎃䎃䎃䎃䎙䎃 䎪䎰
䎃䎃䎃䎃䎃䎃䫹䎚䎃 䎺 䎬 䎵 䎨䎶 䙵䎻
䎃䎃䎃䎃䎃䎃䎃䎃䎛䎃 䎦䎲䎱 䎩 䎬 䎪
䎔䎃 䎧䎺䎃
䎧䎺䎃䎃䎷 䎬 䎰䎨
䎕
䎃
䎶䎦䎤䎱䎃
䎶䎦䎤䎱䎃䎃䎯 䎤䎰䎳
䎤䎰䎳
䎃䎖
䎃
䎶䎦䎤䎱䎃
䎶䎦䎤䎱䎃䎃䎵 䎨 䙵䎶䎷 䎤䎵䎷
䎃 䎗䎃 䎶䎦䎤䎱䎃
䎶䎦䎤䎱䎃䎃䎵 䎨䎶䎸䎰䎨
䎨䎶䎸䎰䎨
䎃䎖䎃 䎶䎦䎤䎱䎃䎃䎵 䎨 䙵䎶䎷 䎤䎵䎷
䎃 䎃䎃䎃 䎃 䎘 䎑 䎓 䏖䏈䏆
䎃
䎖䎃 䎶䎦䎤䎱䎃䎃䎵 䎨 䙵䎶䎷 䎤䎵䎷
䎗䎃 䎶䎦䎤䎱䎃䎃䎵 䎨䎶䎸䎰䎨
䎃䎘䎃 䎶䎦䎤䎱䎃䎃䎺 䎬 䎧䎷䎫
䎃 䎔䎃 䎧䎺䎃䎃䎷 䎬 䎰䎨
䎶䎨䎷䎝䎃䎃䎘
䎶䎨䎷䎝䎃䎃䎘䎃 䎶䎦 䎤 䎱
䎃䎃䎃䎃䎃䎃䎃
䎃䎃䎃䎃䎃䎃䎃䎃䎙
䎃
䎪䎰
䎃䎃䎃䎃䎃䎃
䎃䎃䎃䎃䎃䎃䫹䎚
䎃
䎺 䎬 䎵 䎨䎶 䙵䎻
䎃䎃䎃䎃䎃䎃䎃
䎃䎃䎃䎃䎃䎃䎃䎃䎛䎃 䎦䎲䎱 䎩 䎬 䎪
FT1DR̲DE̲Eng.indb 123
FT1DR̲DE̲Eng.indb 123
13/06/28 15:17
13/06/28 15:17