18
Basic Operation
Preparation
Battery charger
PA-48 or SAD-11B
(accessory)
Grooves in
battery pack
Rails
Rapid Charger CD-41
(option)
1
Install the Battery Pack
2
Turn off the transceiver.
3
Insert the plug of the battery charger (PA-48 or
SAD-11B) in the EXT DC IN jack of the transceiver.
Charging
starts.
While the battery is being charged, the display will
indicate “NOW CHARGING”.
The charge level is indicated by a bar graph.
It takes about 5 hours to charge the battery pack fully.
When charging is completed, the display will change to
indicate “COMPLETE” and the lamp will glow green.
Remark
In the USA Version, the
lamp is not lit when
charging or when charging is complete. When the
charge is complete, the transceiver turns off after 3 minutes.
Supplement
•
It takes about 8 hours to charge the FNB-102LI (option).
• The optional Rapid Charger (CD-41) requires about 2.5 hours to charge the supplied battery pack
(about 4 hours to charge the optional battery pack FNB-102LI).
Place the battery pack on the CD-41 so that the rails of the CD-41 fit into the grooves on the battery
pack.
When charging the battery pack using the CD-41, the LED on the CD-41 indicates the state of charging.
During charging: Lights red Fast blink Slow blink
Completion of charging: Lights green
FT1D
䎱䎲䎺䎃䎦䎫䎤䎵䎪䎬䎱䎪
䎱䎲䎺䎃䎦䎫䎤䎵䎪䎬䎱䎪
䎦䎲䎰䎳䎯䎨䎷䎨
䎦䎲䎰䎳䎯䎨䎷䎨
FT1DR̲DE̲Eng.indb 18
FT1DR̲DE̲Eng.indb 18
13/06/28 15:16
13/06/28 15:16