108
Functions Used
As Needed
Set Mode
6
Turn
O
to select the display method.
Select a message type with reference to the following
table:
Remark
Default:
CALLSIGN
Display
Display Condition
NORMAL
The YAESU logo appears immediately after power-on.
OFF
Immediately after power-on, the reception frequency, etc. appear without
displaying an opening message.
DC
The power supply voltage and time appear immediately after power-on.
MESSAGE
A message comprising up to 16 characters
appears immediately after power-on.
Pressing
H
displays the message registration
screen. Enter a message to be displayed
following the procedure described in “Assigning a
Name to a Memory Channel” (See page 47).
CALLSIGN
Your callsign appears immediately after power-on.
7
Press
p
to save the selected display method, and exit from the Set mode.
Measuring the Battery Voltage and the Transceiver Temperature
Power Supply Voltage Measurement Function/Temperature
Measurement Function
You can measure the battery voltage and the temperature inside the transceiver.
When the optional external power supply adapter with a cigarette plug (E-DC-5B) is
connected, the power supply voltage of this adapter is measured.
Enter the Set mode:
1
Press and hold
M
for over 1 second.
2
Turn
O
to select [1 DISPLAY].
3
Press
H
.
4
Turn
O
to select [10 SENSOR INFO].
5
Press
H
.
The voltage and temperature appear on the LCD.
Remark
When the temperature appears on the LCD, pressing
V
toggles the unit of temperature display between °C and °F.
7
Press
M
.
8
Press
p
to exit from the Set mode.
䎔䎓䎃 䎶䎨 䎱䎶䎲䎵䎃 䎬 䎱 䎩䎲
䎃 䎃䎃䎃䎹 䎲䎯䎷
䎯䎷䫹 䎝䎃䎃䎃
䎝䎃䎃䎃䎃䎯 䏌 䏗䎃䎃䎚 䎑 䎗 䎹
䎃䎃䎃䎃䎃䎷 䎨䎰䎳
䎨䎰䎳䫹 䎝䎃䎃䎃䎃
䎝䎃䎃䎃䎃䎃䎃 䎚 䎚䫹q䎩
䎃
䎶䎨䎷䎝䎃䎃䎔
䎝䎃䎃䎔䎃 䎧 䎬 䎶 䎳䎯䎤䎼
䎯䎤䎼
䎃䎃䎃䎃䎃䎃䎃
䎃䎃䎃䎃䎃䎃䎃䎃䎕
䎃
䎷䎻 䎒 䎵䎻
䎃䎃䎃䎃䎃䎃
䎃䎃䎃䎃䎃䎃䫹䎃䎖
䎃
䎰䎨䎰䎲䎵䎼
䎃䎃䎃䎃䎃䎃䎃
䎃䎃䎃䎃䎃䎃䎃䎃䎗䎃 䎶 䎬 䎪䎱䎤䎯 䎬 䎱䎪
䎱䎪
䎔䎓䎃 䎶䎨 䎱䎶䎲䎵䎃 䎬 䎱 䎩䎲
䎔 䎔䎃䎃䎶
䎔䎃䎃䎶䙵䎰䎨䎷 䎨䎵
䎃
䎶䎼䎰䎥䎲䎯
䎥䎲䎯
䎃 䎔
䎃
䎪䎳䎶䎃 䎬 䎱 䎩䎲
䎃 䎕
䎃
䎷䎤䎵䎪
䎷䎤䎵䎪䎨䎷
䎃
䎯 䎲䎦䎤䎷 䎬 䎲䎱
䎲䎱
FT1DR̲DE̲Eng.indb 108
FT1DR̲DE̲Eng.indb 108
13/06/28 15:17
13/06/28 15:17