36
Basic Operation
Miscellaneous Settings
9
Press
p
to exit from the Set mode.
Remark
When the muting function is active,
]
appears on the
LCD.
When the muting function is active,
]
blinks on the LCD.
Tips
• Even if the muting function is activated, the voice is not muted when no signal is received on the
operating band.
• Pressing
v
while in frequency display screen, zooms in on [MUTE] and both A and B bands can
be muted simultaneously.
Pressing
v
again will deactivate MUTE.
Changing the Transmission Power Level
The maximum transmission power level of this transceiver is 5W. When communicating
with a friend in the immediate area or when you want to reduce the battery power
consumption, you can lower the transmit power level. For power supply types and
transmit power levels, see the table shown below.
1
Press
F
and then
1
.
2
Turn
O
to select the transmit power level.
Select [LOW1], [LOW2], [LOW3], or [HIGH] by turning
O
.
3
Press
p
to save the selected transmit power level.
Battery type
HI (High
Power)
L3
L2
L1
Battery pack
5 W
2.5 W
1 W
0.1 W
External power supply
(13.8 VDC)
Battery Case
(alkaline battery)
Approx. 0.8 W
0.1 W
Tips
• You can set the transmitter power level separately for the A-band and B-band.
• Use the transceiver at the minimum required transmit power level to reduce battery power
consumption.
• By default, “HI (High power)” is selected.
FT1DR̲DE̲Eng.indb 36
FT1DR̲DE̲Eng.indb 36
13/06/28 15:16
13/06/28 15:16