Kintex UltraScale KCU1500 Acceleration Development Board
45
UG1234 (v2017.1) June 20, 2017
www.xilinx.com
Chapter 6:
Install, Bring-Up, and Use
2. Use the
xbinst
utility included with the SDx Environments installation to prepare board
installation files, and program the configuration memory using the Vivado
®
Hardware
Manager.
3. Install device drivers on the host computer. See the
SDx Environments Release Notes,
Installation, and Licensing Guide
(UG1238)
[Ref 1]
for detailed instructions on the
installation and setup process.
Note:
When using the
xbinst
utility with a platform directory structure containing a DSA not
included with the SDx Environments installation, such as one built from the reference design, the
-f
switch must be used to specify the location of the XPFM
(.xpfm)
file for that platform.
To determine the present operational status of the platform in more detail, including the
HAL driver version, PCIe IDs, global memory details, FPGA temperature and voltage,
compute unit status, and more, use the
xbsak
utility included with the directory that is
created by running the
xbinst
utility as described above.
Note:
The PCIe IDs (Vendor, Device, SDevice (Subsystem)) must match those indicated in
Host
Connectivity in Chapter 3
for compatibility with the kernel mode drivers.
> ./xbinst/runtime/bin/xbsak query
INFO: Found 1 device(s)
DSA name: xilinx:kcu1500:4ddr-xpr:4.0
HAL ver: 0.0
Vendor: 10ee
Device: 4b27
Device ver: 64
SDevice: 4340
SVendor: 10ee
DDR size: 0x1000000 KB
DDR count: 4
Data alignment: 64
DDR free size: 0x1000000 KB
Min xfer size: 64
OnChip Temp: 53 C
VCC INT: 930 mV
VCC AUX: 1783 mV
VCC BRAM: 931 mV
OCL Frequency:
0: 300 MHz
1: 500 MHz
PCIe: GEN3 x 8
DMA threads: 4
MIG Calibrated: true
Firewall Last Error Status:
0: 0x0 (GOOD)
1: 0x0 (GOOD)
2: 0x0 (GOOD)
CU Status:
0: 0x4 (IDLE)
1: 0x4 (IDLE)
2: 0x4 (IDLE)
3: 0x4 (IDLE)
INFO: xbsak query successful.
Send Feedback
