Xicom XTS-200C, Operation And Installation Manual

Page: 95 / 168

MNC-0500-010 23 Revision D
Solid State Power Amplifier Communication and Protocol
‘h’
High Power Alarm/Fault
Trip point and setting
A XXXX in Watts (generate alarm)
F XXXX in Watts (generate fault)
D XXXX in Watts (disabled)
‘L’
Low Power Alarm/Fault
Trip point and setting
A XX.X in dBm (generate alarm)
F XX.X in dBm (generate fault)
D XX.X in dBm (disabled)
‘l’
Low Power Alarm/Fault
Trip point and setting
A XXXX in Watts (generate alarm)
F XXXX in Watts (generate fault)
D XXXX in Watts (disabled)
‘M’ Supply Hours XXXXXX hours
‘N’ Transmit Hours XXXXXX hours
‘P’ Fwd Power XX.X in dBm
‘Q’ Reverse Power XX.X in dBm
‘R’
Reverse Power Alarm/
Fault trip point and setting
A XX.X in dBm (generate alarm)
F XX.X in dBm (generate fault)
D XX.X in dBm (disabled)
‘r’
Reverse Power Alarm/
Fault
Trip point and setting
XXXX in Watts
‘T’ Base Plate Temp
XXXX in
o
Celsius (Right Justified and Padded
with Spaces.)
Compatibility : The XTSC-100D supports the following parameter subset (when querying
it for amplifier status): ‘1’, ‘3’, ‘8’, ‘M’, ‘N’, ‘P’, ‘Q’, ‘T’.