![background image](http://html1.mh-extra.com/html/xicom/xts-200c/xts-200c_operation-and-installation-manual_3364450101.webp)
MNC-0500-010
29
Revision D
Solid State Power Amplifier Communication and Protocol
High RF Trip
Command Byte
: 'M'
Function
: Sets a High RF trip point. If output power exceeds the set point, an alarm or
fault is generated provided. By default the trip point is not enabled until this trip point is
set.
Parameter
: "AXXXX" to set an Alarm trip point, "FXXXX" to set a Fault trip point, “D” to
disable.
XXXX is the desired trip point in Watts.
Reflected RF Trip
Command Byte
: 'O'
Function
: Sets a Reflected RF trip point. If reflected power exceeds the set point, an
alarm or fault is generated, as specified by the user. (Note: A hardware Reflected RF
Trip Point is pre-set at the factory. You cannot adjust the hardware trip point by
changing the software trip point). By default, the trip point is not enabled until this trip
point is set.
Parameter
: "AXXXX" to set an Alarm trip point, "FXXXX" to set a Fault trip point, “D” to
disable.
XXXX is the desired trip point in Watts.
Summary of Contents for XTS-200C
