Xicom XTS-200C, Operation And Installation Manual

Page: 124 / 168

THIS DOCUMENT IS THE PROPERTY OF XICOM TECHNOLOGY. REPRODUCTION OR RELEASE WITHOUT EXPRESS PERMISSION IS STRICTLY PROHIBITED.
XTS-200C, 5.85-6.425GHz, W/BUC
Document No. 305-0281-002 REV B Page 2 of 8
1.0 SCOPE
This specification defines performance requirements for a C- Band solid state power amplifier
(SSPA) intended for operation as an outdoor unit (ODU) in a satellite mobile or ground
station.
2.0 APPLICABLE DOCUMENTS
3.0 PERFORMANCE SPECIFICATIONS
3.1
ELECTRICAL INTERFACE
3.1.1
RF Output CPRG-137
3.1.2
RF Input Type N, female
3.1.3
Sample Port Type N, female
3.1.4
Monitor & Control 32 pin (MS3114E-18-32SW)
3.1.5
Waveguide Switch Control 18 pin (MS3114E-14-18S)
3.1.5
Power (AC) 4 pin (Amphenol P/N TS3110-003)
3.2 ELECTRICAL SPECIFICATIONS
3.2.1
Frequency Range: 5.85 GHz to 6.425 GHz
3.2.2.
Saturated Output Power: 53 dBm (typical)
3.2.3 Rated Output Power :
52 dBm minimum
at 1dB gain compression
3.2.3.1
Reverse Power Protection P
rated
– 6 ± 0.5 dB
3.2.4 Maximum Input Power 10 dBm, no damage.
3.2.5 Gain
3.2.5.1 Gain Small Signal 65 dB minimum
75 dB maximum at maximum gain control