Xicom XTS-200C, Operation And Installation Manual, Page: 129 / 168

THIS DOCUMENT IS THE PROPERTY OF XICOM TECHNOLOGY. REPRODUCTION OR RELEASE WITHOUT EXPRESS PERMISSION IS STRICTLY PROHIBITED.
XTS-200C, 5.85-6.425GHz, W/BUC
Document No. 305-0281-002 REV B Page 7 of 8
Appendix A
ATP Test Performance Sheet
Serial Number _____________________
Test Conditions :
Unless otherwise specified, data will be taken
at “ Standard Conditions” aka STD defined as room
(ambient) temperature (nominal 25deg C) , 120V AC , 60Hz
line voltage and attenuation setting =0 dB.
Test Step 1: Test SSPA per the Final Test Setup Procedure WI-0070-01. Attach results to this TPS form
Test Step 2: Test the SSPA per the following:
Requirements Spec
Paragraph
No
Test Description Test Condition
Min Max
Units Measured
Performance
Pass
or
Fail
3.2.1
Frequency Translation
Frequency (Fout)
Fout=4.9GHz+IF
Fout= 5.85GHz
6.00GHz
6.1275GHz
6.425GHz
Note 1):
Output frequency(Fout)= Local
Oscillator (LO)+Input
Frequency(IF)
Fin(MHz) LO(GHz) Fout(GHz)
950 4.9 5.85
1100 4.9 6.00
1237.5 4.9 6.1375
1525 4.9 6.425
STD
Spectrum analyzer
span=5kHz
Input frequency
reference = 10 MHz
after 15min turn on
Record Fout with IF=
950 MHz
1100 MHz
1237.5 MHz
1525 MHz
Fout-0.5
Fout-0.5
Fout-0.5
Fout-0.5
Fout+0.5
Fout+0.5
Fout+0.5
Fout+0.5
kHz
kHz
kHz
kHz
Pass
Fail
3.2.3
Output power P1 dB
STD
Freq= 5.85, 6.425 GHz
Swept Input Power from
-35 dBm to
–12 dBm
52 N/A dBm
See attached
plots
Pass
Fail
3.2.3.1
Reverse Power Protection
STD
Freq = 6.1375 GHz
Operating into a short
P
rated
–
6.5
P
rated
–
5.5
dBm
Pass
Fail