Xicom XTS-200C, Operation And Installation Manual

Page: 113 / 168

MNC-0600-012 3 of 6 Revision C
Preventive Maintenance, ODU SSPA
Preventive Maintenance, ODU SSPA
Requirements
Monthly
Inspect the Air Inlet and Exhaust Ports. Ensure the ports are
unobstructed. Remove any:
•
Lint
•
Leaves
•
Straw
Quarterly
Inspect and clean:
•
The electrical connections; make sure all connections are
clean and tight.
•
The Fin Assembly including main cooling fins and power
supply fins.
Maintenance Procedures
Fin Assembly
Perform the following procedure to remove, inspect, and clean
the cooling Fin Assembly.
1 Turn the Power Amplifier OFF.
2. Disconnect the Prime Power.
3. Remove power supply leaving the main electrical conector in
place. Refer to the appendix titled SSPA Power Supply
Removal Procedure .
4. Using high pressure air blow the any accumulated dirt and
debris out of the exposed fin assembly.
5. Check the integrity of the electrical connections.
To replace the SSPA Power Supply refer to the appendix titled
SSPA Power Supply Removal Procedure .