Xicom XTS-200C, Operation And Installation Manual, Page: 27 / 168

MNC-0200-004 3 of 14 Revision C
Safety/Sicherheit
Safety/Sicherheit
General Information
This chapter identifies the safety requirements to be applied when
performing any of the procedures specified in this manual. It is the
responsibility of the user to follow all applicable safety regulations
when using this manual. This chapter contains safety summaries
consisting of general safety and health precautions.
Summaries
Description
Equipment of this nature has inherent hazards. Only trained
Operators and Service Personnel should work on or operate this
equipment.
The general safety requirements identified in this chapter are
applicable to anyone doing the procedures included in this manual.
Warnings, Cautions, and Notes
Warnings, cautions, and notes are used in these procedures to alert
the user to special conditions regarding safety or correct
performance of a particular step or steps. They are placed
immediately prior to the procedural step to which they apply, or
immediately prior to the procedure itself if they apply to the entire
procedure.
Warnings and cautions are constructed in three parts or sentences.
First, the hazard is stated; second, the correct action to be
performed is stated; and, third, the result of failing to comply with
the action is stated. Notes, however, can be in any form necessary
to convey the needed information. The definitions below show how
warnings, cautions, and notes are used.