Xicom XTS-200C, Operation And Installation Manual

Page: 126 / 168

THIS DOCUMENT IS THE PROPERTY OF XICOM TECHNOLOGY. REPRODUCTION OR RELEASE WITHOUT EXPRESS PERMISSION IS STRICTLY PROHIBITED.
XTS-200C, 5.85-6.425GHz, W/BUC
Document No. 305-0281-002 REV B Page 4 of 8
3.2.15 Spurious Signals
3.2.15.1 Residual AM -50 dBc 30 Hz to 10 kHz
(in band discrete) -20(1.5+log(f)) dBc 10 kHz to 500 kHz
-85 dBc > 500 kHz
3.2.15.2 Residual FM -37 dBc 30 Hz to 10 kHz
(in band discrete) -20(1.5+log(f)) +13 dBc 10 kHz to 500 kHz
-72 dBc >500 kHz
Note: f (kHz)
3.2.15.3 Spurious Signals -65 dBc
(out of band)
3.2.16 Sample Port Coupling -40 dB
(nominal)
3.2.17 Power Requirements
(Prime
Power) 90-264 VAC
47-63Hz, single phase
1250 VA typical
1600 VA maximum
0.95 Power Factor
3.3 MONITOR & CONTROL
The SSPA contains monitor and control functions consistent with standard serial control
interface.
Specific control functions and operating conditions are defined in the operating and
installation manual. A summary of the basic functions is summarized below:
3.3.1
Control
Serial Interfaces RS232 and RS485
RF
Inhibit Hi disables RF
Lo enables RF
Gain Adjustment 0 dB to 20 dB setting
Waveguide switch control see operating and installation manual