Xerox WORKCENTRE 5735 System Administrator Manual Download Page 99

Page: 99 / 362

Network Configuration

WorkCentre™ 5735/5740/5745/5755/5765/5775/5790

System Administrator Guide

The

Default Gateway

will display the link-local address of the router (known in IPv4 as the default

gateway).

10. The device can be configured with up to 4 manual IPv6 addresses, in the

Manual Address

Options

area:

Check the

[Enable Manual Address]

checkbox to enable

Router Prefix

attachment.

The

Router Prefix

is derived from router advertisements. Select a router address prefix from

the list supplied in the

[Router Prefix]

drop-down menu to populate the prefix for manual

entry address.

Click on the

[Add]

button to add your address.

11. Click on the

[Apply]

button to accept changes or

[Undo]

to return the settings to their previous

value.

12. Click on the

[OK]

button when you see the message

“Properties have been successfully

modified”

Summary of Contents for WORKCENTRE 5735











































































































































































































































































































































































Search results

Summary of Contents for WORKCENTRE 5735

Reviews:

Related manuals for WORKCENTRE 5735

Brands by name

Popular brands

Xerox WORKCENTRE 5735, System Administrator Manual

Search results

Summary of Contents for WORKCENTRE 5735

Reviews:

Related manuals for WORKCENTRE 5735

Brands by name

Popular brands