Xerox WORKCENTRE 5735 System Administrator Manual Download Page 287

Page: 287 / 362

WorkCentre™ 5735/5740/5745/5755/5765/5775/5790

System Administrator Guide

287

Click on the

[Embedded Fax]

link and select

[Fax Forward]

in the directory tree. The

Fax Forward

on Receive

page displays.

Click on the

[Customize]

button: the

Custom Attachment Name

screen displays.

In the

Display

area, the following are programmed as

Standard

options, which can be

selected by checking the relevant checkbox:

•

Date

- selecting this allows the date “

<Received_Date>

” to display. When the fax is

forwarded, this is replaced by the current date.

•

Time

- selecting this allows the date “

<Received_Time>

” to display. When the fax is

forwarded, this is replaced by the current time.

For

Custom Text

, further four text fields are available. Check the required checkbox to allow

text entry into the corresponding field. Up to 20 characters or numbers are allowed per field.

The

Position

area will display the order of the fields which comprise the attachment file

name. You can re-arrange the order of the fields appear by selecting a field and using the

and

down

arrows.

Click on the

[Save]

button.

Summary of Contents for WORKCENTRE 5735











































































































































































































































































































































































Search results

Summary of Contents for WORKCENTRE 5735

Reviews:

Related manuals for WORKCENTRE 5735

Brands by name

Popular brands

Xerox WORKCENTRE 5735, System Administrator Manual

Search results

Summary of Contents for WORKCENTRE 5735

Reviews:

Related manuals for WORKCENTRE 5735

Brands by name

Popular brands