Xerox WORKCENTRE 5735 System Administrator Manual Download Page 54 | Manualshive

Page: 54 / 362

background image

Administrator Tools Password

WorkCentre™ 5735/5740/5745/5755/5765/5775/5790
System Administrator Guide

54

3.

Select

[Upgrades]

in the directory tree.

4.

In the

Upgrades

area, check the

[Enabled]

checkbox to enable Machine Software upgrades.

5.

Click on the

[Apply]

button.

6.

Click on the

[OK]

button when you see the message

“Properties have been successfully

modified”

.

Manual Upgrade

1.

From the

Properties

tab, click on the

[General Setup]

link.

2.

Click on the

[Machine Software]

link.

3.

Select

[Manual Upgrade]

in the directory tree.

Note:

Note the current software version and the date installed in the

Last Successful Upgrade

area. The

Auto Upgrade

area displays the status of the Auto Upgrade. If Auto Upgrade is

enabled, the screen displays the time at which the Auto Upgrade will take place and the Server
details.

4.

In the

Manual Upgrade

area:

a.

Click on

[Browse]

to locate the software upgrade file obtained earlier.

b.

Select the file and click

[Open]

.

c.

Click on the

[Install Software]

button to proceed with the upgrade. The file will be sent to

the printer and will disable the printing functionality. The web browser will become inactive
and you will not be able to access the device via this method until the upgrade has completed
and the device has rebooted. The upgrade should take no longer than 15 minutes.

5.

When the device has completed the upgrade it will reboot automatically. The configuration report
will print (if it was enabled in the Tools set up). When the device is accessible from a web browser,
view the software version on the

Internet Services Manual Upgrade

page, or check the

configuration report to verify that the software level has changed.

Note:

Your device can be set to automatically schedule device software upgrades from a central

server at a specific time on a regular basis. For instructions click on the

[Software Upgrade]

link to

the left of the page and select

[Auto Upgrades]

in the directory tree.

You have completed the steps to perform a manual software upgrade.

Software Upgrade: Auto

Your device can be set to automatically schedule device software upgrades from a central server.

WARNING:

This procedure will delete any current jobs in the device print queue and prevent

further jobs from printing until the upgrade has completed. If you wish to preserve these jobs,
allow them to complete before upgrading your software. All configured network settings and
installed options will be retained by the device after the Software Upgrade process.

Determine your current System Software Version number.

1.

From the

Properties

tab, click on the

[General Setup]

link.

2.

Select

[Configuration]

in the directory tree, scroll down to the

Printer Setup

section to see your

System Software Version.

«
...
52
53
54
55
56
...
»

Summary of Contents for WORKCENTRE 5735











































































































































































































































































































































































Reviews:

No comments

Related manuals for WORKCENTRE 5735

Brand: NCR Pages: 36

Brand: NCR Pages: 206

Brand: NCR Pages: 138

Brand: Xerox Pages: 8

Brand: Radio Shack Pages: 62

Brand: Wasp Pages: 2

WorkCentre 7800 series

Brand: Xerox Pages: 14

WORKCENTRE 7775

Brand: Xerox Pages: 15

WORKCENTRE 7775

Brand: Xerox Pages: 24

WORKCENTRE 7755

Brand: Xerox Pages: 252

WORKCENTRE 7755

Brand: Xerox Pages: 15

WORKCENTRE 7755

Brand: Xerox Pages: 40

WorkCentre 5019

Brand: Xerox Pages: 50

versalink C7020

Brand: Xerox Pages: 20

WorkCentre 4265

Brand: Xerox Pages: 4

Brand: Xerox Pages: 4

Brand: Xerox Pages: 281

Brand: Xerox Pages: 100

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands