Xerox WORKCENTRE 5735 System Administrator Manual Download Page 213

Page: 213 / 362

WorkCentre™ 5735/5740/5745/5755/5765/5775/5790

System Administrator Guide

213

In the

Destination Services

area, select the desired service by checking either the

[Fax]

[File]

(selected by default) checkbox.
When selected, the service section will display on the page.

Note:

The

Fax

service requires the Server Fax feature to be enabled on the device.

File

In the

Default Template

page, in the

File

area, a list of file repository destinations for your scan

distribution templates is displayed. The available file destinations is determined by the File Repository
Setup:

•

To specify an additional file destination (if one is available), click on the

[Add]

button. The File

Destinations page will appear.

•

To change an existing file destination, highlight the file and click on the

[Edit]

button. The File

Destinations page will appear.

•

To delete an existing file destination, highlight the file and click on the

[Delete]

button.

Add

To add an additional file destination, in the

File

area, click on the

[Add]

button.

In the

Add Destination to Template

area, select one of the following:

•

Select from a Predefined List

•

Enter a Scan Destination

Summary of Contents for WORKCENTRE 5735











































































































































































































































































































































































Search results

Summary of Contents for WORKCENTRE 5735

Reviews:

Related manuals for WORKCENTRE 5735

Brands by name

Popular brands

Xerox WORKCENTRE 5735, System Administrator Manual

Search results

Summary of Contents for WORKCENTRE 5735

Reviews:

Related manuals for WORKCENTRE 5735

Brands by name

Popular brands