manualshive.com logo in svg

Xerox WORKCENTRE 5735, System Administrator Manual, Page: 53 / 362

Share
Download
Xerox WORKCENTRE 5735 System Administrator Manual Download Page 53

Administrator Tools Password

WorkCentre™ 5735/5740/5745/5755/5765/5775/5790

System Administrator Guide

53

the kit is installed the System Administrator must enable Foreign Interface Device as the Accounting 
Mode from the Tools pathway of the device.

Note:

To configure this feature or these settings access the 

Tools

 pathway as a System 

Administrator. For details, refer to 

Access Tools Pathway as a System Administrator 

on page 18.

1.

From the 

Tools

 pathway, touch 

[Accounting Settings]

.

2.

Touch 

[Authentication]

, the 

Accounting Mode

 screen displays.

3.

For 

Foreign Interface Device

, touch 

[On]

 to enable the feature.

4.

Touch 

[Save]

.

5.

Press the 

<Log In/Out>

 button.

6.

Touch 

[Logout]

 to exit the Tools pathway.

For further information regarding the setup of the third party device, refer to the third party instruction 
manual.

Software Upgrade via Network Connection

WARNING:

This procedure will delete any current jobs in the device print queue and prevent 

further jobs from printing until the upgrade has completed. If you wish to preserve these jobs, 
allow them to complete before upgrading your software. All configured network settings and 
installed options will be retained by the device after the Software Upgrade process.

Prepare for the Upgrade

Obtain the new software upgrade file for your device from the www.xerox.com website or from your 
Xerox Customer Support Representative. Download the upgrade file to a local or network drive. You will 
be able to delete the file after the upgrade procedure.

It is important to obtain the correct upgrade file for your device. Determine the software version you 
are currently running, as follows.

Note:

To configure this feature or these settings access the 

Properties

 tab as a System 

Administrator. For details, refer to 

Access Internet Services as System Administrator 

on page 24.

1.

From the 

Properties

 tab, click on the 

[General Setup]

 link.

2.

Select 

[Configuration]

 in the directory tree, scroll down to the 

Printer Setup 

section to see your 

System Software Version.

Upgrades

The Software Upgrade feature allows the customers to upgrade the device software as requested by a 
Xerox Customer Support Center Representative, without needing a Customer Service Representative to 
be present.

To enable or disable software upgrades on the device, follow the procedure below:

1.

From the 

Properties

 tab, click on the 

[General Setup]

 link.

2.

Click on the 

[Machine Software]

 link.

Summary of Contents for WORKCENTRE 5735











































































































































































































































































































































































Reviews:

No comments