Xerox WORKCENTRE 5735 System Administrator Manual Download Page 136

Page: 136 / 362

Network Configuration

WorkCentre™ 5735/5740/5745/5755/5765/5775/5790
System Administrator Guide

136

Define the machine as a BSD style printer. Type

[lpsystem -t bsd hostname]

. Where hostname is

the machine hostname from the

/etc/hosts

file.

Create the queue. Type

[lpadmin -p queuename -s hostname -T unknown -I any]

. Where

queuename is the name of the queue being created.

Type

[exit]

to exit the Bourne shell and

[exit]

to exit super user mode.

Test the queue created. Type the command

[lp -d queuename /etc/hosts]

. Verify that the job

prints at the device.

SCO UNIX Environment

Information Checklist

Before starting the procedure, ensure the following items are available or tasks have been performed:

•

Ensure that the correct IP Address is being used for the machine. To verify this, print a
Configuration Report from the machine.

At the Device:

Press the

<Machine Status>

button on the device.

Touch the

[Machine Information]

tab.

Touch

[Print Reports]

Touch

[Print Report]

Touch

[Close]

The Configuration Report will print. On the report verify the details under

Network Setup

heading

are correct.

Set up for a SCO UNIX Client

SCO UNIX workstations require specific installation steps to communicate with the machine. The
machines are BSD style UNIX printers, whereas SCO is System V style UNIX.

•

Ensure the machine is connected to the network with Ethernet cabling.

•

Add the machine printer hostname to the /etc/hosts file on the SCO workstation.

•

Ensure that you can PING the machine from the SCO workstation, using the hostname found in
the /etc/hosts file.

Perform the following steps to create a machine print queue on a SCO UNIX workstation using
either the GUI or the TTY method.

GUI Method

From the Main Desktop, select icons:

[System Administration: Printers: Printer Manager]

Select

[Printer: Add Remote: UNIX...]

Enter the following information in to the Add Remote UNIX Printer form:

Host: hostname (Where hostname is the machine hostname from the

/etc/hosts

file).

Printer: name of the queue being created, i.e: dc xxxq. Select

[OK]

to complete the form.

Select

[OK]

at the Message window.

Summary of Contents for WORKCENTRE 5735











































































































































































































































































































































































Search results

Summary of Contents for WORKCENTRE 5735

Reviews:

Related manuals for WORKCENTRE 5735

Brands by name

Popular brands

Xerox WORKCENTRE 5735, System Administrator Manual

Search results

Summary of Contents for WORKCENTRE 5735

Reviews:

Related manuals for WORKCENTRE 5735

Brands by name

Popular brands