Xerox WORKCENTRE 5735 System Administrator Manual Download Page 314

Page: 314 / 362

WorkCentre™ 5735/5740/5745/5755/5765/5775/5790
System Administrator Guide

314

In the

Setup (Required)

area, for

Custom Service Registration

, click on the

[Configure]

button to

display the

HTTP

Web Services

screen.

In the

Remote System Management

area, check the following checkboxes to enable EIP:

•

Custom Service Registration

- this feature enables the Xerox EIP.

•

Device Configuration

- this feature allows the EIP application or other remote

application to retrieve printer configuration information such as the control panel
display dimensions and software version numbers.

In the

Scan Services

area, check the following required checkboxes:

•

Scan Template Management

- this feature enables web services needed for Scanning

Web Services, a feature under Workflow Scanning. this feature lets you manage scan
templates residing in the device through third party applications.

•

Scan Extension

- this feature allows a scan to be initiated from an EIP application.

In the

Security

area, check the following required checkboxes:

•

Xerox Secure Access

- this feature is one of the authentication options available to

restrict access to printer services and features.

•

Session Data

- this feature allows an EIP application to access user session information.

Click on the

[Save]

button to return to the

Custom Service Setup

screen.

Click on the

[OK]

button when you see the message

“Properties have been successfully

modified”

In the

Enable Custom Services

area:

Check the

[Export password to Custom Services]

checkbox to send passwords to Extensible

services.

In the

Browser Settings

area, check the following checkboxes:

•

Enable the Custom Services Browser

- check to enable the Extensible Services browser.

•

Verify Server Certificates

- this feature is optional. Leave unchecked unless Extensible

Services require a Valid Server Certificate signed by a Trusted Certificate Authority.

Click on the

[Apply]

button.

Click on the

[OK]

button when you see the message

“Properties have been successfully

modified”

At the Device:

Press the

<Services Home>

button.

Touch the

[EIP Application]

icon that you registered. Your XEIP workflow is accessible from the

new icon.

Summary of Contents for WORKCENTRE 5735











































































































































































































































































































































































Search results

Summary of Contents for WORKCENTRE 5735

Reviews:

Related manuals for WORKCENTRE 5735

Brands by name

Popular brands

Xerox WORKCENTRE 5735, System Administrator Manual

Search results

Summary of Contents for WORKCENTRE 5735

Reviews:

Related manuals for WORKCENTRE 5735

Brands by name

Popular brands