manualshive.com logo in svg

Xerox WORKCENTRE 5735, System Administrator Manual, Page: 353 / 362

Share
Download
Xerox WORKCENTRE 5735 System Administrator Manual Download Page 353

WorkCentre™ 5735/5740/5745/5755/5765/5775/5790

System Administrator Guide

353

Ensure Embedded Fax is Installed Correctly

At the Device:

Note:

To configure this feature or these settings access the 

Tools

 pathway as a System 

Administrator. For details, refer to 

Access Tools Pathway as a System Administrator 

on page 18.

1.

From the 

Tools

 pathway, touch 

[Service Settings]

.

2.

Touch 

[Optional Services]

.

3.

Touch 

[Embedded Fax]

. The 

Embedded Fax Service

 screen displays.

4.

This should read 

[Enable]

. If this is not Enabled or the Fax Install screen appears, refer to the 

instructions to configure Embedded Fax in 

Embedded Fax 

on page 271.

Ensure the Fax Settings are Correctly Configured

Ensure the device has been configured with the correct fax (telephone) number.

At the Device

Note:

To configure this feature or these settings access the 

Tools

 pathway as a System 

Administrator. For details, refer to 

Access Tools Pathway as a System Administrator 

on page 18.

1.

From the 

Tools

 pathway, touch 

[Service Settings]

.

2.

Touch 

[Fax Settings]

.

Verify that all Fax Setting configuration steps have been performed. Refer to 

Embedded Fax 

on 

page 271.

If the fault requires further investigation, refer to the Xerox website at www.xerox.com for further 
support.

Troubleshooting: Network Accounting

If you are experiencing problems with Network Accounting, first verify that the device is connected on 
the network and functioning as a printer by performing the following activities:

•

Check the network cable at the back of the device.

•

Send a test page from your PC to the device.

•

If connected via TCP/IP try a PING from your workstation to the device.

Is the Device Functioning on the Network as a Printer?

Configure your device on the network or resolve any networking issues before attempting to use the 
Network Accounting feature. For instructions to configure the device on the network, see 

Enable TCP/IP 

and HTTP at the Device 

on page 19.

Ensure Network Accounting is Installed Correctly

At the device, press the 

<Services Home>

 button and touch any feature icon on the screen interface.

Does the device ask you for a User Name and Account?

Summary of Contents for WORKCENTRE 5735











































































































































































































































































































































































Reviews:

No comments