Xerox WORKCENTRE 5735 System Administrator Manual Download Page 135

Page: 135 / 362

Network Configuration

WorkCentre™ 5735/5740/5745/5755/5765/5775/5790

System Administrator Guide

135

Solaris 2.x

Information Checklist

Before starting the procedure, ensure the following items are available or tasks have been performed:

•

Ensure that the correct IP Address is being used for the machine. To verify this, print a
Configuration Report from the machine.

At the Device:

Press the

<Machine Status>

button on the device.

Touch the

[Machine Information]

tab.

Touch

[Print Reports]

Touch

[Print Report]

Touch

[Close]

The Configuration Report will print. On the report verify the details under

Network Setup

heading

are correct.

To Configure your Solaris 2.x Client

•

Ensure the machine is connected to the network with Ethernet cabling.

•

Ensure you can PING the machine IP address from the UNIX workstation.

•

Add the machine printer hostname to the

/etc/hosts

file.

Note:

Perform the following steps to create a machine print queue on a Solaris 2.x workstation

using either the

GUI

or the

TTY

method.

GUI Method

Open a command window from the desktop.

Type

[su]

to become super user.

Type

[admintool]

to run the System Administrator Tool.

Select

[Browse:Printers]

Select

[Edit:Add:Access to Printer...]

Enter the following information into the Access to Remote Printer form:

[Printer Name: queuename]

. Where queuename is the name of the queue being created.

[Print Server: hostname]

. Where hostname is the machine hostname from the

/etc/hosts

file.

Click on

[OK]

to complete the form.

Type

[sh]

to run the Bourne shell.

Type

[lpadmin -p queuename -s hostname!lp]

to modify the remote queuename.

Type

[exit]

to exit the Bourne shell and

[exit]

to exit super user mode.

10. Test the queue created. Type the command

[lp -d queuename /etc/hosts]

tty Method

Type

[su]

to become super user.

Type

[sh]

to run the Bourne shell

Summary of Contents for WORKCENTRE 5735











































































































































































































































































































































































Search results

Summary of Contents for WORKCENTRE 5735

Reviews:

Related manuals for WORKCENTRE 5735

Brands by name

Popular brands

Xerox WORKCENTRE 5735, System Administrator Manual

Search results

Summary of Contents for WORKCENTRE 5735

Reviews:

Related manuals for WORKCENTRE 5735

Brands by name

Popular brands