Xerox WORKCENTRE 5735 System Administrator Manual Download Page 90

Page: 90 / 362

IP Configuration in a Mac Environment

WorkCentre™ 5735/5740/5745/5755/5765/5775/5790
System Administrator Guide

•

An existing operational AppleTalk® network.

•

The AppleTalk Name you wish to assign to your printer.

•

The AppleTalk Zone (if used) in which your printer will reside.

•

Ethernet Cable.

•

The CentreWare Print and Fax Drivers CD (delivered with your machine). Review any README file
contained with the Print Drivers.

At the Machine

Note:

To configure this feature or these settings access the

Tools

pathway as a System

Administrator. For details, refer to

Access Tools Pathway as a System Administrator

on page 18.

From the

Tools

pathway, touch

[Network Settings]

Touch

[Network Setup]

Touch

[AppleTalk Settings]

. The

AppleTalk (R) Settings

screen displays.

Touch

[AppleTalk (R) Enablement]

Touch

[Enable]

Touch

[Save]

to return to the

AppleTalk (R) Settings

screen.

Touch

[Name and Area]

Touch the text field for

[Printer Name]

. Touch

[Clear Text]

to clear default name (the printer

default is * which means the printer will appear in ALL zones) and enter the desired text using
the on-screen keyboard. When finished touch

[Save]

Repeat previous step for

Area Name

Touch

[Save]

Touch

[Close]

Press the

<Log In/Out>

button.

Touch

[Logout

] to exit the Tools pathway.

Wait five minutes for the machine to reboot.

Press the

<Machine Status>

button.

Touch

[Machine Information]

tab.

Touch

[Print Reports]

Touch

[Print Report]

The Configuration Report will print. On the report verify the details under

Network Setup

heading are correct.

Touch

[Close]

Install Print Drivers

Information Checklist

•

Ensure TCP/IP settings are correctly configured on the device.

•

Locate the Print and Fax Drivers CD delivered with your device.

Summary of Contents for WORKCENTRE 5735











































































































































































































































































































































































Search results

Summary of Contents for WORKCENTRE 5735

Reviews:

Related manuals for WORKCENTRE 5735

Brands by name

Popular brands

Xerox WORKCENTRE 5735, System Administrator Manual

Search results

Summary of Contents for WORKCENTRE 5735

Reviews:

Related manuals for WORKCENTRE 5735

Brands by name

Popular brands