Xerox PrimeLink B9100 User Manual Download Page 301

Page: 301 / 484

Remove the jammed paper.

Note: If paper is torn, check inside the printer, then remove the torn paper.

Close the lower left cover.

Close the front cover of the HCF completely.

Note: The printer does not operate if the cover is open even slightly.

Paper Jams at Lever 1a and Knob 1c

Tip: Before proceeding with your copy and print jobs, ensure that all paper jams are cleared, and any small, torn
pieces of paper are removed.

Open the front cover of the High Capacity Feeder (HCF).

To remove the jammed paper, do the following:

Xerox

PrimeLink

B9100/B9110/B9125/B9136 Copier/Printer User Guide

301

High Capacity Feeder

Summary of Contents for PrimeLink B9100





































































































































































































































































































































































































































































































Search results

Summary of Contents for PrimeLink B9100

Reviews:

Related manuals for PrimeLink B9100

Brands by name

Popular brands

Xerox PrimeLink B9100, User Manual

Search results

Summary of Contents for PrimeLink B9100

Reviews:

Related manuals for PrimeLink B9100

Brands by name

Popular brands