Xerox PrimeLink B9100, User Manual

Page: 39 / 484

• Operates at rated print engine speed for most paper sizes
• Quick-change die sets that can be interchanged without any tools
• All die sets include an identification label that provides users with the hole pattern and name
• Convenient storage area for two extra die sets adjacent to the Punch Chip Container
For detailed information and instructions for using the GBC ® AdvancedPunch ™ Pro, refer to the guide on the
customer documentation disk that shipped with the device, or go to www.xerox.com and in the SSeeaarrcchh box, type
GBC AdvancedPunch Pro
.
High Capacity Stacker
The High Capacity Stacker is an optional finishing device that provides large-capacity stacking and offsetting
capabilities for production output to a stacker tray and cart. The stacker provides a top tray that is convenient for
short stack runs.
Note: The High Capacity Stacker requires the Interface Decurler Module.
Crease and Two-Sided Trimmer
The Crease and Two-Sided Trimmer provides crease capabilities and trimming on two sides of the output.
The Crease and Two-Sided Trimmer trims the top and bottom of sheets or booklets to produce full bleed output.
When this device is combined with the SquareFold
® Trimmer Module, all sides of booklets can be trimmed, except
the binding. This enables the creation of full bleed booklets. For more information, refer to SquareFold ® Trimmer
Module
This optional finishing device requires one of the following Production Ready Finishers:
• Production Ready Finisher
• Production Ready Booklet Maker Finisher
• Production Ready Finisher Plus
Xerox
®
PrimeLink
®
B9100/B9110/B9125/B9136 Copier/Printer User Guide
39
Getting Started