Xerox PrimeLink B9100 User Manual Download Page 471

Page: 471 / 484

1. This booklet is not square-folded. It has a rounded, thicker appearance to the spine.

2. This booklet is square-folded. The booklet spine is flattened and squared, giving a perfect-bound book

appearance.

Improving the Book-Pressing Quality

If the spine is curled or torn, you can adjust the volume of the spine. Press the Square Fold setting button.

BEERR

DEESSC

CRRIIPPTTIIO

1–5

• Each time that you press the button, the pressure changes.

• When indicator 5 is illuminated, the maximum amount of pressure is applied.

• When indicator 1 is illuminated, the minimum amount of pressure is applied.

Square Fold setting

T R I M F E AT U R E

Access the trim feature from your computer print driver, the printer user interface, or from the print server.

Trim Options

When you use the trim options, always consider the following:

Xerox

PrimeLink

B9100/B9110/B9125/B9136 Copier/Printer User Guide

471

SquareFold

Trimmer Module

Summary of Contents for PrimeLink B9100





































































































































































































































































































































































































































































































Search results

Summary of Contents for PrimeLink B9100

Reviews:

Related manuals for PrimeLink B9100

Brands by name

Popular brands

Xerox PrimeLink B9100, User Manual

Search results

Summary of Contents for PrimeLink B9100

Reviews:

Related manuals for PrimeLink B9100

Brands by name

Popular brands