Xerox PrimeLink B9100, User Manual

Page: 58 / 484

1. From the Copy screen, touch the C Cooppyy O Ouuttppuutt tab.
2. From the Hole Punch & More screen, select the output features for your job:
• Paper Supply: To view the Paper Supply screen, touch PPaappeerr SSuuppppllyy.
• Staple: This option is available only when you select Collated.
• Hole Punch: This option is available only when you select Collated.
• Collation
• Separator Tray
• Output/Offset/Subset
3. To save the changes, touch SSaavvee.
I M A G E S H I F T
To define Image Shift features, on the Copy screen, use the Image Shift tab.
1. From the Copy screen, touch the IIm maaggee SShhiifftt tab.
2. From the Image Shift screen, select the applicable image shift features.
3. Touch M Maarrggiinn SShhiifftt. To set the image shift parameters, use the left, right, up, or down arrows.
4. Touch O Orriiggiinnaall O Orriieennttaattiioonn. Select U Upprriigghhtt IIm maaggeess or SSiiddeew waayyss IIm maaggeess. To save the image orientation
settings, touch SSaavvee.
5. To mirror the Side 1 settings to Side 2, select the check box for M Miirrrroorr SSiiddee 1 1.
6. To save your changes, touch SSaavvee.
O R I G I N A L T Y P E
To define the Original Type specifications, on the Copy screen, select the O Orriiggiinnaall TTyyppee tab.
1. From the Copy screen, touch the O Orriiggiinnaall TTyyppee tab.
2. Select the applicable specifications for the original type.
3. To save the changes, touch SSaavvee.
DA R K E N / L I G H T E N
You can adjust the copy density to one of seven levels from the Copy screen, in the Darken/Lighten area.
To adjust the density, you can touch the left or right arrows on the touch screen.
58
Xerox
®
PrimeLink
®
B9100/B9110/B9125/B9136 Copier/Printer User Guide
Copying