Xerox PrimeLink B9100 User Manual Download Page 133

Page: 133 / 484

Loading Documents

There are two methods to load documents:

• Document feeder: Use the document feeder to print or scan a single sheet or multiple sheets.

• Document glass: Use the document glass to print or scan a single sheet or a bound book.

Before you load the document, remove any paper clips and staples.

Load the document using the appropriate method:

• Document feeder: Load the document face up, then adjust the document guides to match the size of the

document that you loaded.

• Document glass: Load the document face down, position the document using the rulers and size guides,

then close the scanner cover.

Note: Users can scan up to 5000 impressions per job.

Xerox

PrimeLink

B9100/B9110/B9125/B9136 Copier/Printer User Guide

133

Faxing

Summary of Contents for PrimeLink B9100





































































































































































































































































































































































































































































































Search results

Summary of Contents for PrimeLink B9100

Reviews:

Related manuals for PrimeLink B9100

Brands by name

Popular brands

Xerox PrimeLink B9100, User Manual

Search results

Summary of Contents for PrimeLink B9100

Reviews:

Related manuals for PrimeLink B9100

Brands by name

Popular brands