Xerox Phaser 3310, User Manual

Page: 65 / 200

4. 16
P
RINT
M
EDIA
Printing on Preprinted Paper
1
Load letterheads into the tray you want
to use as shown in the figures. Adjust
the guide to fit the width of the paper
stack.
2
When you print a document on the
paper, configure the paper source, type
and size in the software application. For
details, see
page 5.3 .
Preprinted paper is paper that has some type of printing placed on it before it is sent through
the printer (paper that has a preprinted logo at the top of the page, for example).
Guidelines
• Letterheads must be printed with heat-resistant ink that will not melt, vaporize, or
release hazardous emissions when subjected to the printer’s fusing temperature of 400°F
(205°C) for 0.1 second.
• Ink on letterheads must be non-flammable and should not adversely affect any printer
rollers.
• Forms and letterheads should be sealed in a moisture-proof wrapping to prevent changes
during storage.
• Before you load preprinted paper as forms and letterheads, verify that the ink on the
paper is dry. During the fusing process, wet ink can come off preprinted paper.
Load with the design face up ,
top edge toward the printer .
XXXXXXXXXX
Load with the
design face down ,
bottom edge
toward the printer
.