Xerox Phaser 3310 User Manual Download Page 174

Page: 174 / 200

SING

INDOWS

OST

CRIPT

RIVER

Accessing the PS Printer Driver Features

Certain printer features are not available in this PS driver. Refer
to “Printer Driver Features” on

page 2.15

The printer automatically switches between PS and Printer
driver depending on the driver you have selected.

Opening the Printer Properties Window

The properties window for the Windows PostScript printer driver
can be opened from the Printers folder or an application.

To open the properties window from the Printer folder:

1. Click the Windows

Start

button.

2. Select

Settings

then

Printers

to open the Printers window.

3. Select

Xerox Phaser 3310 PS

4. Click the right mouse button and select

Properties

to open

the properties window.

To open the properties window from inside an
application:

1. From the

File

menu, select

Print

to open the Print dialog

box.

2. Make sure that

Xerox Phaser 3310 PS

is selected in the

Name

drop-down list.

3. Click

Properties

to open the properties window.

Summary of Contents for Phaser 3310









































































































































































































Search results

Summary of Contents for Phaser 3310

Reviews:

Related manuals for Phaser 3310

Brands by name

Popular brands

Xerox Phaser 3310, User Manual

Search results

Summary of Contents for Phaser 3310

Reviews:

Related manuals for Phaser 3310

Brands by name

Popular brands