Xerox Phaser 3310 User Manual Download Page 24

Page: 24 / 200

ETTING

OUR

RINTER

Plug the power cord into the power
receptacle on the back of the printer.

Plug the other end into a properly
grounded AC outlet.

Turn on the power.

Turn on the Printer

➞

To AC outlet

As the printer powers up, all the printer
control panel lights turn on briefly. When
only the

light remains on, press and

hold the

button.

Hold the

button down until all the

lights blink (for about 2 seconds) and
then release. The demo page will print.

Laser Printer

Excellent Performance, High quality

Robust Network connectivity

Xerox Phaser 3310

The demo page provides a sample of the
print quality to help you verify that the
printer is printing correctly.

Print a Demo Page!

Summary of Contents for Phaser 3310









































































































































































































Search results

Summary of Contents for Phaser 3310

Reviews:

Related manuals for Phaser 3310

Brands by name

Popular brands

Xerox Phaser 3310, User Manual

Search results

Summary of Contents for Phaser 3310

Reviews:

Related manuals for Phaser 3310

Brands by name

Popular brands