Xerox Phaser 3310 User Manual Download Page 122

Page: 122 / 200

ROBLEM

OLVING

Problem

Solution

• If characters are improperly formed, producing hollow

images, the paper stock may be too slick. Try a different
paper. See “Paper Specifications” on

page A.2

• If characters are improperly formed, producing a wavy

effect, the scanner unit may need service. Check to see if it
also occurs on a demo page by pressing the

button on

the control panel when the printer is ready. If you need
service, contact a service representative.

Misformed characters

• Check the paper type and quality. See “Paper

Specifications” on

page A.2

• Make sure that the paper or other media is loaded correctly

and the guides are not too tight or too loose against the
paper stack.

Page skew

Solving Print Quality Problems

Background scatter results from bits of toner distributed on
the printed page.

• The paper may be too damp. Try printing with a different

batch of paper. Do not open packages of paper until
necessary so that the paper does not absorb too much
moisture from the air.

• If background scatter occurs on an envelope, change your

printing layout to avoid printing over areas that have
overlapping seams on the reverse side. Printing on seams
can cause this problem.

• If background scatter covers the entire surface of a printed

page, adjust the print resolution through your software
application or the printer properties.

Background scatter

AaBbCc
AaBbCc
AaBbCc

AaBbCc

AaBbCc
AaBbCc
AaBbCc

AaBbCc
AaBbCc

AaBbCc
AaBbCc
AaBbCc

AaBbCc

AaBbCc
AaBbCc
AaBbCc

AaBbCc
AaBbCc

AaBbCc

AaBbCc
AaBbCc
AaBbCc

AaBbCc

AaBbCc
AaBbCc
AaBbCc

AaBbCc
AaBbCc

Summary of Contents for Phaser 3310









































































































































































































Search results

Summary of Contents for Phaser 3310

Reviews:

Related manuals for Phaser 3310

Brands by name

Popular brands

Xerox Phaser 3310, User Manual

Search results

Summary of Contents for Phaser 3310

Reviews:

Related manuals for Phaser 3310

Brands by name

Popular brands