Xerox Phaser 3310, User Manual

Page: 167 / 200

C. 10
P
RINTING FROM
DOS A
PPLICATIONS
PCL
• Typeface allows you to select the desired typeface. This
setting is ignored when the software application specifies a
font.
• Symbol Set determines the symbol set. A symbol set is a set
of alphabetic and numeric characters, punctuation, and special
symbols used when printing with a selected font.
• Pitch sets the font pitch (only if you have selected a scalable
monospaced font). Pitch refers to the number of fixed-space
characters in a horizontal inch of type.
• Point Size sets the font point size (only if you have selected a
scalable typographic font). Point size refers to the height of the
characters in the font. One point equals approximately 1/72 of
an inch. You can select point sizes from 4.0 to 999.75 in
increments of 0.25 points.
• Lines Per Page sets the number of lines that print on each
page. The setting can range from 5 to 128 lines per page.
• Courier determines the courier font type: Regular or Dark .
• Font List prints the font list showing all the fonts available for
PCL emulation.
Selecting Print Settings