Xerox ApeosPort-III C7600, User Manual

Page: 144 / 369

Fa
x
4
4 Fax
142
1
Enter a fax number using the numeric
keypad.
2
To specify multiple recipients, select [+ Add]
on the touch screen.
Note • If you enter an incorrect value, press the
<C> button and enter the correct value.
• Depending on the settings, a screen to re-
enter the recipient may be displayed after
you specify the recipient and then select
[+ Add] on the touch screen. In such
case, re-enter the recipient.
For information on specifying a fax number using the
address book, refer to "Specifying a Destination Using
the Address Book" (P.159).
For information on specifying a fax number using the speed dialing, refer to "Speed Dialing (Specifying
a Destination Using an Address Number)" (P.160).
For information on specifying a fax number using one touch buttons, refer to "Specifying a Destination
using a One Touch Button" (P.161).
For information on the Internet Fax, refer to "About Internet Fax" (P.147).
Step 4 Starting the Fax Job
The following explains the procedure to start a fax job.
1
Press the <Start> button.
Important • If the document has been set in the
document feeder, do not hold down the
document while it is being conveyed.
• Fax cannot be sent if a copy protection
code is detected.
Note • Depending on the settings, the screen to
re-enter the recipient may be displayed
after pressing the <Start> button. In this
case, re-enter the recipient.
• If a problem occurs, an error message
appears in the touch screen. Solve the
problem in accordance with the message.
„ If you have more documents
If you have more documents to fax, select [Next Original] on the touch screen while the
current document is being scanned. This allows you to send the documents as one set
of data.
1 2 3
4 5 6
7 8 9
0 #
C
Numeric keypad
1 2 3
4 5 6
7 8 9
0 #
C
<Start> button